Ruijie RG-S2600G-I Series - Page 563

CLI Reference MLD Snooping Configuration Commands
MLD Snooping Configuration Commands
Configuration Related Commands
ipv6 mld profile
The MLD profile is used to set a series of the group filter. Before entering the profile mode, a profile must
be configured in the global configuration mode. This is a mode navigation command. You can choose
the profile-number and enter the mld profile configuration mode.
ipv6 mld profile profile-number
no ipv6 mld profile profile-number
Parameter
description
Parameter
Description
profile-number
Set the profile number. The valid
range is 1-1024.
Default
Settings
N/A
Command
mode
Global configuration mode.
Usage
guidelines
MLD Profile is the group filter for the usage of the
“multicast address range in the SVGL mode”, “multicast
data filtering range of the route interface”, “MLD Filtering
range”. To this end, to make the profile effective, the
profile and the specific function shall be associated.
Examples
The following example shows how the profile 1 enter the profile
configuration mode:
Ruijie(config)# ipv6 mld profile 1
Ruijie(config-profile)#
Related
commands
Command
Description
range
Set the profile multicast address
range.
deny
Set the profile action deny.
permit
Set the profile action permit.