CLI Reference MLD Snooping Configuration Commands
clear ipv6 mld snooping gda-table
Use this command to clear the forwarding table information learned dynamically.
clear ipv6 mld snooping gda-table
Use this command to clear the forwarding table
information learned dynamically.
The following example shows how to clear the forwarding
table information learned dynamically:
Ruijie# clear ipv6 mld snooping gda-table
debug mld-snp
Use this command to enable the mld service debugging switch.
debug mld-snp
undebug mld-snp
Use this command to enable the mld service debugging
switch.
The following example shows how to enable the mld
service debugging switch:
Ruijie# debug mld-snp
To Next Page
Loading...
