CLI Reference AAA Configuration Commands
Global configuration mode.
RGOS enables the exec accounting function after enabling the login
authentication.
After enabling the accounting function, it sends the account start
information to the security server when the users log in the NAS CLI,
and sends the account stop information to the security server when
the users log out. If it does not send the account start information to
the security server when a user loggs in, it does not send the account
stop information to the security server when a user loggs out, either.
The configured exec accounting method must be applied to the
terminal line that needs accounting command; otherwise it is
ineffective.
The following example performs accounting of the network service
requests from users using RADIUS, and sends the accounting
messages at the start and end time of access:
Ruijie(config)# aaa accounting network start-stop group radius
Enable the AAA security service.
Define AAA authentication.
Apply the Exec accouting to the
terminal line..
aaa accounting network
Use this command to account users in order to count the network access fees or manage user activities.
The no form of this command is used to disable the accounting function.
aaa accounting network {default | list-name} start-stop group radius
no aaa accounting network {default | list-name}
Perform accounting of the network related
service requests, including dot1x, PPP, etc.
Perform accounting of resource related service
requests.
Name of the accounting method list
Send accounting messages at both the start time
To Next Page
Loading...
Need help?
General