Ruijie RG-S2600G-I Series - Page 636

CLI Reference TACACS+ Configuration Commands
server ip-address
no server ip-address
Parameter
description
Parameter
Description
ip-address
server address in TACACS+ group server
Default
Configuration
N/A
Command
mode
TACACS+ group server configuration mode.
Usage
guidelines
You must enter TACACS+ server group configuration mode to
configure this command.
To configure server address in TACACS+ group server, you must
execute tacacs-server host in the global configuration mode.
For the server address in TACACS+ group servers, when one server
does not reply, it will send the request to the next server.
Examples
The following example configures a TACACS+ server group named
tac1 and a TACACS+ server address 1.1.1.1 in this group:
Ruijie(config)#aaa group server tacacs+ tac1
Ruijie(config-gs-tacacs+)#server 1.1.1.1
Related
commands
Command
Description
aaa group
server tacacs+
Configure TACACS+ server group.
ip vrf
forwarding
Configure VRF name supported by TACACS+
server group.
ip vrf forwarding(TACACS+)
Use this command to configure vrf name used by TACACS+ group server (this command
exists in the device supporting VRF)
ip vrf forwarding vrf-name
no ip vrf forwarding
Parameter
description
Parameter
Description
vrf-name
VRF name.