Ruijie RG-S2600G-I Series User Manual

CLI Reference 802.1X Configuration Commands
show dot1x
auto-req
This command is used to show the setting of the active
authentication.
Platform
Description
-
dot1x client-probe enable
Use this command to enable the online probe function for the client.
dot1x client-probe enable
no dot1x client-probe enable
Parameter
Description
-
Defaults
Disabled.
Command Mode
Global configuration mode
Usage Guide
Use this command to configure the online probe function for the client.
Configuration
Examples
The following example shows to how to enable the online probe function for the
client.
Ruijie# configure terminal
Ruijie(config)# dot1x client-probe enable
Ruijie(config)# end
Ruijie# show dot1x
802.1X Status: Enabled
Authentication mode: EAP-MD5
Authed User Number: 0
Re-authen Enabled: Enabled
Re-authen Period: 1000 sec
Quiet Timer Period: 1000 sec
Tx Timer Period: 10 sec
Supplicant Timeout: 10 sec
Server Timeout: 10 sec
Re-authen Max: 5 times
Maximum Request: 3 times
Filter Non-RG Supp: Disabled
Client Oline Probe: Enabled
Eapol Tag Enable: Disabled
Authorization Mode: Group Server
Related Commands
Command
Description

Ruijie RG-S2600G-I Series Specifications

General

Brand	Ruijie
Model	RG-S2600G-I Series
Category	Switch
Language	English