Ruijie RG-S2600G-I Series - Page 680

CLI Reference 802.1X Configuration Commands
Usage Guide
-
Configuration
Examples
The following example shows how to view ports that participate in the
authentication:
Ruijie# show dot1x port-control
Interface Mode Dynamic-User Static-User Max-User Authened Mab
--------- ---------- ------------ ----------- -------- --------
---------
Fa0/5 mac-based 0 1 6000 yes
disable
Ruijie#
Related Commands
Command
Description
dot1x auth-mode
It is used to set the 802.1x authentication mode.
dot1x max-req
It is used to set the maximum number of authentication
request re-transmission times.
dot1x port-control
auto
It is used to set a port to participate in authentication.
dot1x reauth-max
It is used to set the maximum number of applicant
re-authentication times.
dot1x
re-authentication
It is used to set whether periodic re-authentication is
required.
dot1x timeout
quiet-period
It is used to set the waiting time for re-authentication.
dot1x timeout
re-authperiod
It is used to set the re-authentication interval for an
applicant.
dot1x timeout
server-timeout
It is used to set the authentication timeout period between
a device and authentication server.
dot1x timeout
supp-timeout
It is used to set the authentication timeout period between
a device and applicants.
dot1x timeout
tx-period
It is used to set the re-transmission interval.
Platform
Description
-