Ruijie RG-S2600G-I Series User Manual

CLI Reference 802.1X Configuration Commands
server-timeout
a device and authentication server.
dot1x timeout
supp-timeout
It is used to set the authentication timeout period between
a device and applicants.
dot1x timeout
tx-period
It is used to set the re-transmission interval.
Platform
Description
-
show dot1x user id
Use this command to view the information about the 802.1X authentication configuration table.
show dot1x user id [ id ]
Parameter
Description
Parameter
Description
id
It indicates the User ID shown in show summary.
Defaults
-
Command Mode
Privileged mode
Usage Guide
-The command is used to view the information of a specific user.
Configuration
Examples
The following example shows how to view the information about the 802.1x
authentication configuration table:
Ruijie# show dot1x user id 1
User name: caikov
id: 1
Type: static
Mac address is 0013.2049.8272
Vlan id is 217
Access from port Gi0/13
User ip address is 192.168.217.64
Max user number on this port is 6000
COS on this port is 5
Up-bandwidth is 1024 kbps
Down-bandwidth is 1024 kbps
Authorization vlan is dep7
Authorization seesion time is 1000000 seconds
Authorization ip address is 192.168.217.64
Start accounting
Permit proxy user
Permit dial user
IP privilige is 2

Ruijie RG-S2600G-I Series Specifications

General

Brand	Ruijie
Model	RG-S2600G-I Series
Category	Switch
Language	English