Ruijie RG-S2600G-I Series - Page 694

CLI Reference Web Authentication Configuration Commands
Platform
Description
N/A
http redirect timeout
This command is used to set the timeout for the redirection connection maintenance. The no form of
this command is used to reset the timeout to 3 seconds.
http redirect timeout seconds
no http redirect timeout
Parameter
Description
Parameter
Description
seconds
Set the timeout for the redirection connection maintenance.
It is in the range of 1 to 10.
Defaults
3 seconds.
Command
Mode
Global configuration mode
Usage Guide
This command is used to set the timeout for the redirection connection maintenance. After the
three-way handshake succeeds, the redirection connection is maintained until the user sends an
HTTP GET/HEAD packet and the system returns an HTTP redirection packet. This timeout is set to
prevent users from occupying TCP connections for long without sending any GET/HEAD packets.
Configuration
Examples
Example 1: Set the timeout for the redirection connection maintenance to 4.
Ruijie(config)# http redirect timeout 4
Related
Commands
Command
Description
show http redirect
View the HTTP redirection configuration.
Platform
Description
N/A
show http redirect
This command is used to display the HTTP redirection configuration.
show http redirect
Parameter
Description
Parameter
Description
N/A
N/A