Ruijie RG-S2600G-I Series User Manual

CLI Reference Guide File System Configuration Commands
pwd
Show the present directory.
Platform
Description
N/A
rename
Use this command to move or rename the specified file.
rename url1 url2
Parameter
Description
Parameter
Description
url1
The source file URL to move.
url2
The URL of the destination file or directory.
Defaults
N/A.
Command
Mode
Privileged EXEC mode.
Usage Guide
This command only supports to move the local file, but not to transfer the file to the server using the
protocol. The supported prefixes are: usb0/1, flash and slave.
Configuration
Examples
Example 1: Move the log.txt to the upper-level directory and rename it config.txt:
Ruijie# rename tmp/log.txt ../config.txt
Example 2: Move the log.txt in the slave board to the usb0 device:
Ruijie# rename slave:/log.txt usb0:/log.txt
Example 3: Rename the log.txt in the present directory as log.txt.bak:
Ruijie# rename log.txt log.txt.bak
Example 4: Move the rgos.bin in the SD card to the flash:
Ruijie# rename sd0:/rgos.bin flash:/rgos_bak.bin
Example 5: Move the test.txt in the U disk to the SD card:
Ruijie# rename usb0:/test.txt sd0:/test2.txt config-interface-vfc)#bind
mac-address 001d.0928.b62f
Related
Commands
Command
Description
delete
Delete the file.
copy
Copy the file.
Platform
N/A

Ruijie RG-S2600G-I Series Specifications

General

Brand	Ruijie
Model	RG-S2600G-I Series
Category	Switch
Language	English