Ruijie RG-S2600G-I Series - Page 731

CLI Reference Port-based Flow Control Configuration Commands
switchport port-security
Enable the
port-security.
switchport port-security
binding
Configure the secure
address binding.
Switchport port-security
mac-address
Set the static secure
address in the interface
configuration mode.
switchport port-security aging
Set the aging time for
the port secure
address.
nac-author-user maximum
Use this command to set the limited number of port IP address. Use the no form of the command to
disable the port IP address number limit.
nac-author-user maximum value
[no] nac-author-user maximum
Parameter
description
Parameter
Description
value
The limited IP address number
in the range of 1 to 1024.
Default
configuration
Disabled.
Command
mode
Interface configuration mode.
Usage
guidelines
If the limited number of the IP address you set is less than bound number, it will
prompt this setting fails.
Examples
The example below describes how to set the limited number of the port IP
address as 100
Ruijie(config)#inter f 0/1
Ruijie(config-if)#nac-author-user maximum 100
Related
commands
Command
Description
show nac-author-user
Show the limited and
bound number of IP
address on the port.