Ruijie RG-S2600G-I Series - Page 733

CLI Reference Port-based Flow Control Configuration Commands
Usage
guidelines
This command shows all the port security configurations, secure addresses and
the way to deal with violation if no parameter is configured.
Examples
Ruijie# show port-security
Secure Port MaxSecureAddr(count) CurrentAddr(count) Security Action
-------- -------------- ----------- -----------
Gi1/1 128 1 Restrict
Gi1/2 128 0 Restrict
Gi1/3 8 1 Protect
Related
commands
Command
Description
switchport port-security
Enable port security and configure
the way to deal with violation.
switchport port-security
aging
Specify the aging time for the
secure address on the interface.
switchport port-security
mac-address
Configure the secure address
table.
show storm-control
Use this command to show storm suppression information.
show storm-control [interface-id]
Parameter
description
Parameter
Description
interface-id
Interface on which the storm suppression
is enabled
Default
configuration
All information is displayed.
Command
mode
Privileged EXEC mode.
Examples
Ruijie# show storm-control gigabitethernet 1/1
Interface Broadcast Control Multicast Control Unicast Control
----------- --------------- ---------------- ---------------
Gi1/1 Disabled Disabled Disabled
Related
commands
Command
Description
storm-control
Enable storm suppression.