Ruijie RG-S2600G-I Series - Page 737

CLI Reference CPU Protection Configuration Commands
cpu-protect
traffic-class all
bandwidth
bandwidth_value
Set the maximum rate for all
queues.
cpu-protect cpu
bandwidth
bandwidth_value
Set the maximum rate for the
CPU port.
cpu-protect traffic-class id id_num bandwidth bandwidth_value
Use this command to set the maximum rate for each queue.
cpu-protect traffic-class id id_num bandwidth bandwidth_value
Parameter
description
Parameter
Description
id_num
Queue id for the packet, in the
range of 0-7.
bandwidth_value
The maximum rate for the queue,
in the range of 32-131072kbps.
Default
For S2900 series and S5760 series, the default bandwidth of the
queue 7 is 100000kbps, and other queues’ is 1000kbps.
For S3760 series, the default bandwidth of all queues is 1000kbps.
Command
mode
Global configuration mode.
Examples
The following example sets the the maximum rate for queue 7 as
312kbps:
Ruijie#configure terminal
Ruijie(config)# cpu-protect traffic-class id 7 bandwidth 312
Ruijie(config)#end
Ruijie# show cpu-protect traffic-class id 7
%*********traffic class bandwidth(kbps)**********
7 312
Related
commands
Command
Description
cpu-protect type
packet-type
traffic-class
traffic-class-num
Set the traffic class for the
corresponding packet type.
cpu-protect
Set the maximum rate for all