Ruijie RG-S2600G-I Series - Page 740

CLI Reference CPU Protection Configuration Commands
cpu-protect mac-address storm-control enable value
Parameter
description
Parameter
Description
value
The generated mac-address
number per second, in the range
of 200-51200.
Default
2000.
Command
mode
Global configuration mode.
Examples
The following example sets the the maximum rate for the CPU port as
2000kbps:
Ruijie#configure terminal
Ruijie(config)# cpu-protect mac-address storm-control enable 3000
Ruijie(config)#end
Ruijie# show cpu-protect mac-address storm-control
%MAC address storm control state: enable
%MAC address storm control rate: 3000(address/second)
Caution
This command is not supported on S3760 series.
show cpu-protect type packet-type
Use this command to show the queue corresponding to each type of packets.
show cpu-protect type packet-type
Command
mode
Privileged EXEC mode.
Usage
guidelines
This command shows the queue corresponding to each type of
packets.
Examples
The following example shows the corresponding queues of all packet
types using the command show cpu-protect type all:
%**********packet type traffic-class**********
bpdu 6