Ruijie RG-S2600G-I Series User Manual

CLI Reference DHCP Snooping Configuration Commands
Ruijie# configure terminal
Ruijie(config)# ip dhcp snooping information option
Ruijie(config)# end
Ruijie# show ip dhcp snooping
Switch DHCP snooping status : ENABLE
DHCP snooping Verification of hwaddr status : ENABLE
DHCP snooping database write-delay time : 0
DHCP snooping option 82 status : DISABLE
DHCP Snooping Support Bootp bind status: ENABLE
Interface Trusted Rate limit (pps)
------------------------ ------- ----------------
Related
commands
Command
Function
show ip dhcp snooping
Show the configuration of the
DHCP Snooping.
ip dhcp snooping information option format remote-id
Use this command to set the option82’s sub-option remote-id as the customized character string. The no
form of this command will disable this function.
[no] ip dhcp snooping information option format remote-id [string ascii-string | hostname]
Parameter
description
Parameter
Description
string
The content of the option82’s remote-id
extension format is customized character
string.
hostname
The content of the option82’s remote-id
extension format hostname.
Default
Disabled
Command
mode
Global configuration mode.
Usage
guidelines
This command sets the remote-id in the option82 to be added to the DHCP
request message as the customized character string. The DHCP server will
assign the IP address according to the option82 information.
Examples
The following is an example of adding the option82 into the DHCP request
packets with the content of remote-id being hostname:

Ruijie RG-S2600G-I Series Specifications

General

Brand	Ruijie
Model	RG-S2600G-I Series
Category	Switch
Language	English