CLI Reference DHCP Snooping Configuration Commands
This command is used to import the flash file information to the DHCP
Snooping database in real time.
The following example demonstrates how to import the flash file information
to the DHCP Snooping database.
Ruijie# renew ip dhcp snooping database
This command is supported on all switches.
ip dhcp snooping help
Use this command to show the configuration help of dhcp command.
ip dhcp snooping help
Global/interface configuration mode.
Currently, you can enter the question mark “?” to display the
configuration help with the configuration of the next keyword or
parameter and related description. However, users may not
understand the meaning about the description of keywords, so
they do not know how to continue the configuration in order to
complete the configuration task.
To Next Page
Loading...
Need help?
General