Ruijie RG-S2600G-I Series User Manual

CLI Reference DHCPv6 Snooping Configuration Commands
Ruijie(config)# ipv6 dhcp snooping information option
Ruijie(config)# end
Ruijie# show ipv6 dhcp snooping
Switch DHCPv6 snooping status ：ENABLE
DHCPv6 snooping vlan: 1-4094
DHCPv6 snooping database write-delay time: 0 seconds
DHCPv6 snooping option 18/37 status: ENABLE
DHCPv6 ignore dest-not-found :DISABLE
DHCPv6 snooping link detection :DISABLE
Interface Trusted Filter DHCP
---------------------- ------- ---------
FastEthernet0/10 yes DISABLE
Related
commands
Command
Description
show ipv6 dhcp
snooping
View the configuration information of the
DHCPv6 snooping.
Platform
description
This command is supported on all switches.
ipv6 dhcp snooping information option format remote-id
Use this command to enable the function of adding the option37 remote-id customized character string
into the DHCPv6 request packets in the global configuration mode. The no form of this command will
disable this function.
[no] ipv6 dhcp snooping information option format remote-id [string ascii-string |
hostname]
Parameter
description
Parameter
Description
string
The content of Option37
remote-id extension format is
customized character string.
hostname
The content of Option37
remote-id extension format is
hostname.
Default
Disabled.
Command
mode
Global configuration mode.

Ruijie RG-S2600G-I Series Specifications

General

Brand	Ruijie
Model	RG-S2600G-I Series
Category	Switch
Language	English