Ruijie RG-S2600G-I Series - Page 789

CLI Reference DHCPv6 Snooping Configuration Commands
Examples
The following example shows how to enable the address binding in
the MAC+IPV6 filtering mode on the interface fastethernet 0/1:
Ruijie(config)# interface fastethernet 0/1
Ruijie(config-if)# ipv6 verify source port-security
Platform
description
This command is supported on all switches.
renew ipv6 dhcp snooping database
When the DHCPv6 Snooping function is enabled, use this command to import the information in current
flash to the DHCPv6 Snooping binding database manually as needed.
renew ipv6 dhcp snooping database
Parameter
description
Parameter
Description
-
-
Default
Disabled
Command
mode
Privileged EXEC mode.
Usage
guidelines
This command is used to import the flash file information to the
DHCPv6 Snooping database in real time.
Examples
The following example imports the flash file information to the
DHCPv6 Snooping database.
Ruijie# renew ipv6 dhcp snooping database
Platform
description
This command is supported on all switches.
Showing Related Commands
The DHCPv6 Snooping showing related commands include:
 show ipv6 dhcp snooping
 show ipv6 dhcp snooping binding
 show ipv6 dhcp snooping prefix
 show ipv6 dhcp snooping statistics
 show ipv6 source binding