Ruijie RG-S2600G-I Series - Page 812

CLI Reference NFPP Configuration Commands
commands
arp-g
uard
attac
k-thr
esho
ld
Set the global attack threshold.
arp-g
uard
rate-l
imit
Set the global rate-limit threshold.
show nfpp
arp-guard
summary
Show the configurations.
show nfpp
arp-guard hosts
Show the monitored host.
clear nfpp
arp-guard hosts
Clear the isolated host.
nfpp arp-guard scan-threshold
Use this command to set the scan threshold.
nfpp arp-guard scan-threshold pkt-cnt
Parameter
description
Parameter
Description
pkt-cnt
Set the scan threshold with the valid
range of [1, 9999].
Default
Settings
By default, the sport-based scan threshold is not configured.
Command
mode
Interface configuration mode.
Usage
guidelines
N/A
Examples
Ruijie(config)# interface G 0/1
Ruijie(config-if)# nfpp arp-guard scan-threshold 20
Related
Command
Description