Ruijie RG-S2600G-I Series - Page 886

CLI Reference NFPP Configuration Commands
commands
dhcpv6-guard
attack-threshold
Set the global attack threshold.
dhcpv6-guard
enable
Enable the DHCPv6 anti-attack
function.
dhcpv6-guard
isolate-period
Set the global isolate time.
dhcpv6-guard
monitor-period
Set the monitor period.
dhcpv6-guard
monitored-host-li
mit
Set the maximum number of the
monitored hosts.
dhcpv6-guard
rate-limit
Set the global rate-limit threshold.
nfpp
dhcpv6-guard
enable
Enable the DHCPv6 anti-attack
function on the interface.
nfpp
dhcpv6-guard
isolate-period
Set the isolate time.
nfpp
dhcpv6-guard
policy
Set the rate-limit threshold and
attack threshold.
show nfpp icmp-guard hosts
Use this command to show the monitored host.
show nfpp icmp-guard hosts [statistics | [[vlan vid] [interface interface-id] [ip-address |
mac-address]]]
Parameter
description
Parameter
Description
statistics
Show the statistical information of
the monitored host.
vid
The VLAN ID.
interface-id
The interface name.
ip-address
The IP address.
mac-address
The MAC address.
Default
Settings
N/A.