Ruijie RG-S2600G-I Series - Page 888

CLI Reference NFPP Configuration Commands
Usage
guidelines
N/A.
Examples
Ruijie# show nfpp icmp-guard summary
Format of column Rate-limit and Attack-threshold is per-src-ip/
per-src-mac/per-port.
Interface Status Isolate-period Rate-limit Attack-threshold
Global Enable 300 4/-/60 8/-/100
Gi 0/1 Enable 180 5/-/- 8/-/-
Gi 0/2 Disable 200 4/-/60 8/-/100
Maximum count of monitored hosts: 1000
Monitor period:300s
Field
Description
Interface(Global)
Global configuration
Status
Enable/Disable the anti-attack
function.
Rate-limit
In the format of the rate-limit
threshold for the source IP address/
the rate-limit threshold for the
source MAC address/ the rate-limit
threshold for the port
Attack-threshold
In the same format as the rate-limit.
-
No configuration.
Related
commands
Command
Description
icmp-guard
attack-threshold
Set the global attack threshold.
icmp-guard enable
Enable the ICMP anti-attack
function.
icmp-guard
isolate-period
Set the global isolate time.
icmp-guard
monitor-period
Set the monitor period.