Ruijie RG-S2600G-I Series - Page 890

CLI Reference NFPP Configuration Commands
show nfpp ip-guard hosts
Use this command to show the monitored host.
show nfpp ip-guard hosts [statistics | [[vlan vid] [interface interface-id] [ip-address |
mac-address]]]
Parameter
description
Parameter
Description
statistics
Show the statistical information of
the monitored host.
vid
The VLAN ID.
interface-id
The interface name.
ip-address
The IP address.
mac-address
The MAC address.
Default
Settings
N/A.
Command
mode
Privileged EXEC mode.
Usage
guidelines
N/A.
Examples
The following example shows the statistical information of the
monitored host:
Ruijie# show nfpp ip-guard hosts statistics
success fail total
------- ---- -----
100 20 120
Ruijie#show nfpp ip-guard hosts
If column 1 shows '*', it means "hardware do not isolate host" .
VLAN interface IP address Reason remain-time(s)
---- -------- --------- ------- -------------
1 Gi0/1 1.1.1.1 ATTACK 110
2 Gi0/2 1.1.2.1 SCAN 61
Total:2 host(s)
Related
Command
Description