Ruijie RG-S2600G-I Series - Page 892

CLI Reference NFPP Configuration Commands
the rate-limit threshold for the
source MAC address/ the rate-limit
threshold for the port
Attack-threshold
In the same format as the rate-limit.
-
No configuration.
Related
commands
Command
Description
ip-guard
attack-threshold
Set the global attack threshold.
ip-guard enable
Enable the IP anti-scan function.
ip-guard
isolate-period
Set the global isolate time.
ip-guard
monitor-period
Set the monitor period.
ip-guard
monitored-host-li
mit
Set the maximum number of the
monitored hosts.
ip-guard rate-limit
Set the global rate-limit threshold.
nfpp ip-guard
enable
Enable the IP anti-scan function
on the interface.
nfpp ip-guard
isolate-period
Set the isolate time.
nfpp ip-guard
policy
Set the rate-limit threshold and
attack threshold.
show nfpp ip-guard trusted-host
Use this command to show the trusted host free from being monitored.
show nfpp ip-guard summary
Parameter
description
Parameter
Description
-
-
Default
Settings
N/A.
Command
mode
Privileged EXEC mode.