Ruijie RG-S2600G-I Series - Page 914

CLI Reference Guide ACL Configuration Commands
clear ipv6 access-list counters [ name ]
Parameter
Description
Parameter
Description
name
Name of the IPv6 ACL.
Defaults
-
Command
mode
Privileged EXEC mode
Usage Guide
This command is used to clear the packet matching counter of specific or all IPv6 ACLs.
Configuration
Examples
The following example clears the packet matching counter of the IPv6 ACL named v6-list:
Ruijie#show access-lists v6-list
ipv6 access-list extended v6-list
petmit ipv6 ::192.168.4.12 any log (100 matches)
deny any any log (9 matches)
Ruijie# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)# clear ipv6 access-list counters v6-list
Ruijie(config)# end
Ruijie #show access-lists v6-list
ipv6 access-list extended v6-list
petmit ipv6 ::192.168.4.12 any log
deny any any log
Related
Commands
Command
Description
ipv6 access-list
It indicates the definition of the IPv6 ACL.
deny
The definition denies semantic ACL entries.
permit
The definition permits semantic ACL entries.
Platform
Description
This command is supported only in 10.4 (3b16), 10.4 (3b17), 10.4 (5b1) and later versions.
clear mac access-list counters
Use this command to clear the packet matching counter of the MAC ACL.
clear mac access-list counters [ id | name ]
Parameter
Description
Parameter
Description