Ruijie RG-S2600G-I Series - Page 925

CLI Reference Guide ACL Configuration Commands
Platform
Description
-
ip access-list log-update interval
Use this command to configure the interval at which the packet matching log of the IPv4 ACL is
updated. Use the no form of this command to restore the default value.
ip access-list log-update interval time
no ip access-list log-update interval
Parameter
Description
Parameter
Description
time
For the ACL rule with the log output option, a packet hit is output at
the interval of ACL logging output. The interval ranges from 0 to 1440
minutes, and the default value is five minutes, indicating that the ACL
matching log of a specified flow is output every five minutes. 0
indicates that no ACL logging is output.
Defaults
The default interval at which the packet matching log of IPv4 ACL is updated is five minutes.
Command
mode
Global configuration mode
Usage Guide
This command is used to configure the interval at which the packet matching log of IPv4 ACL is
updated.
Configuration
Examples
The following example configures the minimum interval for packet matching log updating of IPv4 ACL
to 10 minutes:
Ruijie# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)# ip access-list log-update interval 10
Related
Commands
Command
Description
ip access-list
It indicates the definition of the IPv4 ACL.
deny
The definition denies semantic ACL entries.
permit
The definition permits semantic ACL entries.
Platform
Description
This command is supported only in 10.4 (3b16), 10.4 (3b17), 10.4 (5b1) and later versions.