Ruijie RG-S2600G-I Series User Manual

CLI Reference REUP Configuration Commands
show interfaces [interface-id] switchport backup [detail]
Parameter
description
Parameter
Description
interface-id
The interface id of the dual link backup.
detail
Show the detailed information about the
dual link backup.
Default
Show the dual link backup information on all interfaces.
Command
mode
Privileged EXEC mode.
Examples
Ruijie # show interfaces switchport backup detail
Switch Backup Interface Pairs:
Active Interface Backup Interface State
----------------------------------------------------
Gi0/23 Gi0/24 Active Up/Backup
Standby
Interface Pair : Gi0/23, Gi0/24
Preemption Mode : Off
Preemption Delay : 35 seconds
Bandwidth : Gi0/23(1000 Mbits), Gi0/24(1000 Mbits)
show mac-address-table update group detail
Use this command to show the mac-address-table update group information.
show mac-address-table update group detail
Parameter
description
Parameter
Description
detail
Show the detailed information about the
mac-address-table update group.
Default
Show the mac-address-table update group information.
Command
mode
Privileged EXEC mode.
Examples
Ruijie # configure terminal
Ruijie (config)# mac-address-table move update receive
Ruijie (config)# interface range gigabitEthernet 0/3-4
Ruijie (config-if-range)# mac-address-table update group
Ruijie (config-if-range)# end

Ruijie RG-S2600G-I Series Specifications

General

Brand	Ruijie
Model	RG-S2600G-I Series
Category	Switch
Language	English