446
[ESC+TU] Printing tag data (ISO/IEC15693) (CL4NX Only)
Command ESC TU Parameter
Hexadecimal code <1B>
16
<54>
16
<55>
16
a(,n
～
n)
Initial Value Nil
When turning off the power The set command is not maintained.
Valid range within item The set parameter is in effect until a new specification is
made.
Valid range and term of
command
Valid range between items The set parameter becomes invalid.
[Function]
Reads UID data from RFID tag and develops to specified direction to make it possible to print on
label.
[Format]
<TU>a(,n
～
n)
• Parameters
a = To use this functionality or not
1: Read UID data and start using
0: Cancel use
n = ID converted to a UID in the data area of each UID command (only when a = 1).
Character size: 4-16 bytes
Character type: Any (excluding line feed and cancel codes)
(All parameters should be in the ASCII format)
[Coding Sample]
A sample using SATO as ID.
<A>
<RK>4,D0,,df2:FFE0
<TU>1,SATO
<%>0
<V>0410
<H>0090
<P>00
<L>0101
<XM>SATO
<%>0
<V>0060
<H>0040
<D>102120*SATO*
<%>0
<V>0195
<H>0055
<P>00
<L>0101
<XM>*SATO*
<%>1
<V>0595
<H>0520
<D>102060*SATO*
<TU>0
To Next Page
Loading...
Need help?
General
Weight and Dimensions
