752
Handover mode
This mode works when the power of printer is turned on.
Read information on handover (Bluetooth, Wi-Fi connection), which is written to NFC tag memory
when the power of printer is turned OFF, from NFC tag memory, then connection is established with
Bluetooth or Wi-Fi based on the information.
Purpose: Send SBPL data (Print), Acquisition of printer setting, value, and status.
* Communication after connecting Handover shall be performed via Bluetooth or Wi-Fi.
Please refer to "Bluetooth" or "Wireless LAN" described before for data format and transmission
sequence.
Information on handover
Data communication
Parent topic NFC
To Next Page
Loading...
