687
Specifications of software
Supported protocol: TCP/IP
Network layer: IPv4, IPv6, ICMP
Session layer: TCP, UDP
Application layer: LPR, FTP, DHCP, HTTP/HTTPS, SNMP, NTP
1. LPR, FTP and dedicated socket protocol of TCP/IP can be used for sending print data.
2. Status of printer can be obtained by dedicated socket protocol.
Parent topic LAN/Wireless LAN
Specifications of TCP/IP
TCP/IP protocol environment has LPR and FTP for print. DHCP can be used for setting address.
Parent topic LAN/Wireless LAN
Specifications of LPR
LPR protocol complies with RFC1179 and handles a list of theoretical printer names as queue name.
The queue name is "lp".
Send sequence of data file and control file in the job does not affect on print operation when the job
is sent by LPR.
* Job deletion is not supported by LPR.
* Specifications of LPR can be used only in Status 4: ENQ response.
* Missing label or duplicated image may occur when many labels are printed by LPR due to the specifications
of Windows.
* Banner page print is not supported.
* Multiple sessions cannot be established at the same time.
Parent topic LAN/Wireless LAN
Specifications of FTP
FTP protocol complies with RFC959 and handles the list of theoretical printer names as a transfer
directory. File transfer to this directory executes print operation. Note that it is possible to specify
ASCII (A) and BINARY (I) as transfer mode, and mode varies by the client.
The directory name is "lp".
* Multiple sessions cannot be established at the same time.
* Login users are as follows (without password)
root
anonymous
lp
Parent topic LAN/Wireless LAN
To Next Page
Loading...
Need help?
General
Weight and Dimensions
