515
[ESC+/S] Set Print Template Name
ESC /S ParameterHexadecimal code
<1B>
16
<2F>
16
< 53>
16
,aaa,n~n
Initial value Nil
When the power is OFF The set parameter is maintained.
Valid range within items The set parameter is invalid until the next valid setting.
Valid range and term of
command
Valid range between items The set parameter is invalid until the next valid setting.
[Function]
To change the print template name that is already registered inside the printer memory.
[Format]
</S>,aaa,n~n
• Parameter
aaa [Print template format number] = 001 - 999
n~n [Print template name] = Valid range (Template name) : 1 to 32 ASCII characters
[Coding Example]
Change Print Template with the template name "SATO Barcode".
<A>
<CC>1
</S>,001,SATO Barcode
<Z>
[Supplementary Explanation]
• To avoid incorrect response from printer, this command should not use in conjunction with other
commands.
• Only first 32 characters of the print template name will be registered into the printer memory.
• The character "," (HEX: 2C) is not allowed in template name registration.
• Printer will return "ACK" back to host PC if operation success, else printer will return "NAK" to
the host PC if operation fail.
• If the parameter "aaa" is not assigned, </S> command will be ignored.
Parent topic XML Command
To Next Page
Loading...
Need help?
General
Weight and Dimensions
