600
[DC2+DE] File download
Command DC2 DE Parameter
Hexadecimal code <12>
16
<44>
16
<45>
16
,aa,b,c...c,d...d,e...e
Initial Value None
When turning off the power The file is maintained.
Valid range -
Printer operation in
progress
The command cannot be received during the printer
operation. ([NAK] return)
When acquiring label
sensor information
Commands are not accepted while acquiring sensor
information. ([NAK] reply)
Valid range and term of
command
Error The command can be received even if an error is
occurring.
[Function]
This command is used to download the specified file.
[Format]
[DC2]DE,aa,b,c...c,d...d,e...e
[Parameters]
Symbol Parameter name Valid range Acquisition method
a Identifier SB: SBPL settings
SZ: SZPL settings
SI: SIPL settings
SD: SDPL settings
ST: STCL settings
CA: Common settings (when specifying other
than font logo and TrueType fonts)
Two characters fixed
acquisition
b File type 0: Font/logo
1: TrueType font
2: Wireless LAN certificate (Wi-Fi Root CA)
3: Wireless LAN certificate (Wi-Fi Private Key)
4: Wireless LAN certificate (Wi-Fi Private Key)
5: Wireless LAN certificate (Wi-Fi EAP_FAST
PAC_file)
6: HTTPS certificate
One character fixed
acquisition
c File name Data within 255 characters including the
following character groups.
• Alphabet
• Numeral
• Hyphen ("-")
• Underscore ("_")
• Period (".")
Acquired up to ","