SATO CL6NX - I;O Signal; 1 Input Signal

730
I/O signal
1) Input signal
2) Output signal
3) Output waiting for dispenser
Parent topic External signal interface
1) Input signal
Item
Input wave form
Print
1
2
3
4
20ms
1
st
label printed
(PREND)
P
rint end
Print start
(PRIN)
Reprint
(PRIN2)
Print
1
st
label printed
Print start
(PRIN)
Reprint
(PRIN2)
1
2
3
4
(PREND)
Print end
Reprint
Without print start signal
Prin
t
1
st
Label printed
Print start
Reprint
(PRIN2)
1
2
3
4
20ms
(PREND)
Print end
Reprint
With reprint signal
20ms
10ms
<
=
Print start
[Notes]
• Keep “Low” for print start signal (PRIN) until print end signal (PREND) is output. *(Refer to
the following “Keeping print start signal (PRIN)” table.) Make sure to output 10 ms or more for
reprint signal (PRIN2). Printer won’t reprint if reprint signal cannot be detected from 10 ms and
under.
• If NULL cut specified not output print end signal (PREND).