SATO CL6NX - [ESC+PH] Print Method

354
[ESC+PH] Print Method
ESC PH ParameterHexadecimal code
<1B>
16
<50>
16
<48>
16
a
Initial value a=0
When the power is OFF The set parameter is maintained.
Valid range within items The set parameter is valid until the next valid setting.
Valid range and term of
command
Valid range between items The set parameter is valid until the next valid setting.
[Function]
Specifies print method.
[Format]
<PH>a
• Parameter
a [Print method]
0 : Thermal transfer
1 : Direct Thermal
[Coding Example]
<A>
<PH>0
<Z>
[Supplementary Explanation]
• Delimit Start of Data Transmission <A> and End of Data Transmission <Z> with this command
for use.
• The set parameter is maintained after turning off the printer.
Parent topic System Command