598
[DC2+DC] Reset
Command DC2 DC Parameter
Hexadecimal code <12>
16
<44>
16
<43>
16
None
Initial Value None
When turning off the power -
Valid range -
Printer operation in
progress
The command cannot be received during the printer
operation. ([NAK] return)
When acquiring label
sensor information
Commands are accepted while acquiring sensor
information.
Valid range and term of
command
Error The command can be received even if an error is
occurring.
[Function]
This command is used to restart the printer.
[Format]
[DC2] DC
[Response (only during printing)]
[NAK]<15>
16
　　
DC2 + DC
Host
This product
Power off
process
Printer restart
Parent topic Common commands for all languages
To Next Page
Loading...
