25
Control command
[ESC+A] Start Code
[ESC+Z] Stop Code
[ESC+Q] Print Quantity
[ESC+ID] Job ID Number
[ESC+WK] Job Name
[ESC+CR] Status 5 reply check setting
Parent topic Part 1 SBPL Commands
[ESC+A] Start Code
ESC A ParameterHexadecimal code
<1B>
16
<41>
16
Nil
Initial value Nil
When the power is OFF The set command is not maintained.
Valid range within items The set command becomes invalid.
Valid range and term of
command
Valid range between items The set command becomes invalid.
[Function]
Specifying the start of data transmission.
[Format]
<A>
[Coding Example]
<A>
<V>100<H>200<P>2<L>0202<XM>ABCD
<Q>2
<Z>
[Supplementary Explanation]
• Indicates the start of item and to be placed at the head of item.
•
Use <A> and End of Data T
ransmission <Z> as a pair of commands.
[Note]
• Setting value of all commands excluding a part of system commands will be set to default.
• If this command is not specified, printing will not be performed.
Parent topic Control command
To Next Page
Loading...
Need help?
General
Weight and Dimensions
