114
[ESC+RG] Multiple language
ESC RG ParameterHexadecimal code
<1B>
16
<52>
16
<47>
16
a,b,c,ddd,eee,ffff…fff
Initial value Nil
When the power is OFF The set parameter is not maintained.
Valid range within items The set parameter becomes invalid.
Valid range and term of
command
Valid range between items The set parameter becomes invalid.
[Function]
Printing multiple language fonts.
[Format]
<RG>a,b,c,ddd,eee,ffff…fff
Parameter
a : [Character code]
Character code of print data to be specified to a parameter f.
Refer to the table below.
b : [Font set] Font type for printing. Refer to the table below.
c : [Modification]
0: Standard
1: Italic
2: BOLD
3: BOLD+Italic
d : [Width]
Valid range: 20 to 999 (dots)
Valid range: P09 to P99 (points)
e : [Height]
Valid range: 20 to 999 (dots)
Valid range: P09 to P99 (points)
*One point is 0.35 mm.
f
: [Print data] (character code)
[Character code list]
Parameter a Character code
0 UNICODE (UTF-8)
1 UNICODE (UTF-16BE) *Recommended
2 S-JIS
3 BIG5
4 GB18030
5 KSX 1001 (EUC-KR)
- Character set specified by <CE>.
* If UTF-8 or X201 has been selected by <CE>, it is the value of the following.
<CE>:
UTF-8、<RG>Parameter
a: 0:UTF-8