SATO CL6NX - Specification of SNMP

701
Specification of SNMP
SNMP is a protocol to monitor and control network devices connected to network.
This product supports communication with SNMPv1, SNMPv2c, SNMPv3, and MIB supports
following MIB-II. With this MIP, it is possible to acquire information, to send notification on
administrative information, and to change settings.
• system(1)
• interface(2)
• at(3)
• ip(4)
• icmp(5)
• tcp(6)
• udp(7)
• snmp(10)
• host(25)
• printerMIB(43)
HostResourceMIB/printerMIB is used for showing the status of this product. Please refer to the next
page for the details.
PrinterMIB / HostResourceMIB (T.P.D) to show the status of printer
Parent topic LAN/Wireless LAN