56
[ESC+/] Recall Form Overlay
ESC / ParameterHexadecimal code
<1B>
16
<2F>
16
(aa)
Initial value Nil
When the power is OFF The set command is not maintained.
Valid range within items The set parameter is valid until the next valid setting.
Valid range and term of
command
Valid range between items The set parameter is valid until the next valid setting.
[Function]
Recalling form overlay.
[Format]
</>(aa)
• Parameter
a [Registration key] = Valid Range : 01 to 99 (omissible)
[Coding Example]
<A>
</>01
<V>200<H>100<P>0<$>B,100,100,6
<$=>SATOPRINTER
<V>720<H>150<B>102100*95000012345*
<Q>2
<Z>
[Supplementary Explanation]
• This command invokes the contents registered by Store Form Overlay <&> to print.
• When detecting this command in normal print data, it will be combined with drawing stored in
form overlay and printed.
• The registration key is not checked, so that specifying wrong registration key does not raise an
error.
Parent topic Modification Command
To Next Page
Loading...
Need help?
General
Weight and Dimensions
