SATO CL6NX - 3 Output Waiting for Dispenser

734
3) Output waiting for dispenser
Item
Output pulse
1
2
3
4
20ms
Print 1 label
Print
operation
Print end
(PREND)
Operation 1
Backfeed after printing
Dispenser complete
Waiting for
dispenser
500ms +
Backfeed time
1
2
3
4
20ms
Print 1 label
Print operation
Print end
(PREND)
Dispenser complete
Waiting for
dispenser
Operation 2
backfeed before printing
• Please note that Output timing of print end signal (PREND) is changed when Wait signal for
dispenser is valid.
Operation 1) Output Print End Signal after Wait label for dispenser is removed and backfeeding
of label is completed to print start position.
Operation 2) Output Print End Signal after feeding label to dispense position.
Parent topic I/O signal