SATO CL6NX - [DC2+DH] File Deletion

609
[DC2+DH] File deletion
Command DC2 DH Parameter
Hexadecimal code <12>
16
<44>
16
<48>
16
aa,b,c(,ddddd,eeeee)
Initial Value None
When turning off the power -
Valid range -
Printer operation in
progress
The command cannot be received during the printer
operation. ([NAK] return)
When acquiring label
sensor information
Commands are not accepted while acquiring sensor
information. ([NAK] reply)
Valid range and term of
command
Error The command can be received even if an error is
occurring.
[Function]
This command is used to delete the registered files.
[Format]
[DC2]DH,aa,b,c(,ddddd,eeeee)
[Parameters]
Symbol Parameter name Valid range Acquisition method
a Language SB: SBPL settings
SZ: SZPL settings
SI: SIPL settings
SD: SDPL settings
ST: STCL settings
Two characters fixed
acquisition
b File type 0: Font/logo
1: TrueType font
One character fixed
acquisition
c Deletion type 0: File specification
1: All files
One character fixed
acquisition
d File name size (byte) 1 to 255 Acquired up to ","
e File name
* Only the file name is
specified.
Data including the following character groups
• Alphabet
• Numeral
• Hyphen ("-")
• Underscore ("_")
• Period (".")
Acquired up to the file
name size
[Return data format (normal)]
[ACK]<06>
16
[Return data format (when a command error occurs)]