710
Bluetooth
Bluetooth interface of this printer complies with Bluetooth Ver. 3.0 standard.
Basic specification
Bluetooth settings
CRC transmission data
CRC calculation data
Example of transmission data
CRC error display
Transmission sequence
Parent topic Part 2 Interface Specification
Basic specification
Standard
Bluetooth Ver. 3.0+EDR Power Class 2
Communication distance
10 m (Prescribed measurement environment)
Profile for use
Serial Port Profile (SPP)
SPP defines connection of two Bluetooth supported devices by establishing virtual serial port.
Operation mode
Slave mode
Authentication level
Level 1: No authentication
Level 2-1: PIN code authentication, Service level, No encryption
Level 2-2: PIN code authentication, Service level, Encryption
Level 3: PIN code authentication, Link level, No encryption
Level 4: Support for secure simple pairing, Service level, Encryption
Initial value: No authentication
PIN code
ASCII code in 1 to 16 digits (20H,21H,23H to 7EH)
Initial value: 0000
Device name
ASCII code in 0 to 53 digits (20H,21H,23H to 7EH)
Initial value: SATO PRINTER_xxxxxxxxxxxx (xxxxxxxxxxxx is BD address)
Power saving mode
sniff, park, hold (Operate according to host setting)
Setting of CRC (Enabled/Disabled)
CRC: Enabled/Disabled
Initial value: Disabled
To Next Page
Loading...
Need help?
General
Weight and Dimensions
