379
[ESC+&R] Form Overlay Call
ESC &R ParameterHexadecimal code
<1B>
16
<26>
16
<52>
16
,aa
Initial value Nil
When the power is OFF The set parameter is not maintained.
Valid range within items The set parameter becomes invalid.
Valid range and term of
command
Valid range between items The set parameter becomes invalid.
[Function]
Invoking the contents in memory card with Registration of Form Overlay <&S>.
[Format]
<&R>,aa
• Parameter
a [Registration Number] = Valid Range
:
1 to 99
[Coding Example]
<A>
<CC>1
<&R>,1
<Z>
[Supplementary Explanation]
• Specify slot number of Card Slot for Use <CC> prior to this command <&R> by all means.
• This command can be combined with different registration No. and printed.
• When registration No. is not specified, this command will be ignored.
• If specifying unregistered No., Read/Write error will occur.
• When registering without specifying window, Vertical Print Position <V> and Horizontal Print
Position <H> will be ignored and V1 and H1 (Start position of drawing area) will be determined.
• When specifying and registering window, movement with <V> and <H> will be enabled.
Note that when exceeding print area, the portion outside of print area will not be printed.
• Please note that this command cannot be used without a memory card.
• The error occurs when specifying unused or specifying the slot which the printer is allocated.
[Note]
• Do not turn the printer's power off when accessing to the memory. When the printer power is off
while memory accessing, the data in the accessed media may be corrupted.
[Valid Commands]
Print position <V> <H>
Parent topic Memory Card Command
To Next Page
Loading...
Need help?
General
Weight and Dimensions
