232
[ESC+2D20] MaxiCode
ESC 2D20 ParameterHexadecimal code
<1B>
16
<32>
16
<44>
16
<32>
16
<30>
16
,a(,bbb,ccc,d...d)
Initial value Nil
When the power is OFF The set parameter is not maintained.
Valid range within items The set parameter becomes invalid.
Valid range and term of
command
Valid range between items The set parameter becomes invalid.
[Function]
Specifying MaxiCode.
[Format](Setting part)
<2D20>,a(,bbb,ccc,d...d)
• Parameter
a [Mode]
2
:
Transportation (Numeric)
3
:
Transportation (Alphanumeric)
4
:
Standard symbol
6
:
Reader programing
* Following parameter must be specified when specifying mode 2 or mode 3.
When specifying mode 4 or mode 6, the parameter should be omitted.
b [Service class] = Valid Range
:
001 to 999 (Numeric)
c [Country code] = Valid Range
:
001 to 999 (Numeric)
d [Postal code] = Valid Range
: 0 to 999999999 (Mode 2)
000000 to 999999 (Mode 3)
* Mode 2: Max 9 digits (Numeric only)
Mode 3: Fixed 6 digits (Capital alphabet)
[Format](Data part)
<DN>mmmm,n...n
• Parameter
m [Number of Data] = Valid Range
:
1 to 138
n [Print data] = Data
* 00H cannot be specified.
Maximum print dataMode Service class Country code Postal code
Numeric only Alphanumeric
2 Max. 9 digits
3
Fixed 3 digits
(Numeric only)
Fixed 3 digits
(Numeric only)
Fixed 6 digits
(Alphanumeric)
123 84
4
6
Omission 138 93
To Next Page
Loading...
Need help?
General
Weight and Dimensions
