34
[ESC+V] Vertical Print Position
ESC V ParameterHexadecimal code
<1B>
16
<56>
16
aaaaa
Initial value aaaaa=1
When the power is OFF The set parameter is not maintained.
Valid range within items The set parameter is valid until the next valid setting.
Valid range and term of
command
Valid range between items The set parameter becomes initial value at the next item
<A>.
[Function]
Specifying vertical print position from its start point by dot.
[Format]
<V>aaaaa
• Parameter
a [Vertical Print Position] = Refer to the table below.
[Coding Example]
Vertical print position: 100 dots
<A>
<V>100<H>200<P>2<L>0202<XM>ABCD
<Q>2
<Z>
[Supplementary Explanation]
• Specifying the start of vertical position for the print of text, barcode, ruled line and graphics.
[Note]
• Any contents such as text, barcode and graphic exceed printing area will not be printed.
[Initial Value and Valid Range of Parameter]
Model Head density Initial value Valid range (dots)
203 dpi 1 1 to 20000
305 dpi 1 1 to 18000
CL4NX
609 dpi 1 1 to 9600
203 dpi 1 1 to 20000CL6NX
305 dpi 1 1 to 18000
Parent topic Print Position Command
To Next Page
Loading...
Need help?
General
Weight and Dimensions
