244
[ESC+2D32] Micro QR Code
ESC 2D32 ParameterHexadecimal code
<1B>
16
<32>
16
<44>
16
<33>
16
<32>
16
,a,bb,c
Initial value Nil
When the power is OFF The set parameter is not maintained.
Valid range within items The set parameter becomes invalid.
Valid range and term of
command
Valid range between items The set parameter becomes invalid.
[Function]
Specifying QR Code (Micro QR Code).
[Format] (Setup part)
<2D32>,a,bb,c
• Parameter
a [Error Correction Level]
L
:
7%
M
:
15%
Q
:
25%
b [Size of one side of cell] = Valid Range
:
01 to 99 dots
* Specify more than 02 dots when head density is 12 dots/mm, otherwise scanner may have reading
problem.
c [Data setup mode]
0
:
Manual setup
1
:
Automatic setup
[Format] (Data part)
Manual setup (Data setup mode)
<DS>k,n...n : Use when input mode specification is Numeric mode, Alphanumeric mode and Kanji
mode.
<DN>mmmm,n...n : Use when specifying by binary.
Automatic setup (Data setup mode)
<DN>mmmm,n...n : Change input mode automatically according to input data.
• Parameter
k [Input mode]
1
:
Numeric mode
2
:
Alphanumeric mode
3
:
Kanji mode (Shift JIS Kanji)
* There is binary specification other than above, but data specification command is different.
m [Number of data] = Valid Range
:
1 to 15
* Specify when specifying Automatic setup in Data setting mode.
n [Print data] = Data
To Next Page
Loading...
Need help?
General
Weight and Dimensions
