339
[ESC+~] Multiple Cut
ESC ~ ParameterHexadecimal code
<1B>
16
<E7>
16
aaaa
Initial value aaaa=1
When the power is OFF The set parameter is not maintained.
Valid range within items The set parameter is valid until next valid setting.
Valid range and term of
command
Valid range between
items
The set parameter becomes initial value at the next
item <A>.
[Function]
Specifies the number of labels to print between each cut.
[Format]
<~>aaaa
• Parameter
a [Number of prints before cutting] = Valid Range : 0 to 9999
[Coding Example]
<A>
<V>100<H>200<P>2<L>0202<XM>ABC
<Q>4
<~>2
<Z>
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
Cut Cut Cut
Cut
2 pcs
4 pcs
Feed direction
[Supplementary Explanation]
• Valid only for Cutter models.
• If this command is not specified in Cutter mode, each label will be cut off after printed.
• In case the parameter "a" is set to 0, no label will be cut.
• The product of Qty and value of "aaaa" shall not exceed the maximum number "999999".
• This command <~> shall be put after Qty<Q>. <Q>, in this case, is to specify number of sheets
to be cut.
Parent topic System Command
To Next Page
Loading...
Need help?
General
Weight and Dimensions
