372
[ESC+FM] Memory Card Initialization
ESC FM ParameterHexadecimal code
<1B>
16
<46>
16
<4D>
16
aaaaaaaa
Initial value Nil
When the power is OFF The set parameter is maintained.
Valid range within items The set parameter becomes invalid.
Valid range and term of
command
Valid range between items The set parameter becomes invalid.
[Function]
Specifying the format (initialization) of memory card.
[Format]
<FM>aaaaaaaa
• Parameter
a [User ID] = Specifying up to 8 bytes in alphanumeric and symbols.
[Coding Example]
<A>
<CC>1
<FM>satocard
<Z>
[Supplementary Explanation]
• Specify slot number registered with Card Slot for Use <CC> prior to this command <FM> by all
means.
• This command <FM> is for formatting a memory card; therefore, it cannot be used in
combination with other commands.
• Initialization takes time. Do not send any command until the initialization finishes.
• The error occurs when specifying the slot allocated to the printer's memory.
[Note]
• Do not turn the printer's power off when accessing to the memory. When the printer power is off
while memory accessing, the data in the accessed media may be corrupted.
Parent topic Memory Card Command
To Next Page
Loading...
Need help?
General
Weight and Dimensions
