SATO CL6NX - [ESC+TU] Printing Tag Data (Felica) (CL4 NX Only)

505
[ESC+TU] Printing tag data (FeliCa) (CL4NX Only)
Command ESC TU Parameter
Hexadecimal code <1B>
16
<54>
16
<55>
16
a(,n
～
n)
Initial Value Nil
When turning off the power The set command is not maintained.
Valid range within item The set parameter is in effect until a new specification is
made.
Valid range and term of
command
Valid range between items The set parameter becomes invalid.
[Function]
Reads 16-digit hexadecimal numeric sequence from FeliCa Lite, FeliCa Lite-S tag and renders to the
specified direction to make it possible to print on label.
[Format]
<TU>a(,n
～
n)
• Parameters
a = To use this functionality or not
1：
Read IDm data and start using
0：
Cancel use
n = ID that is converted to IDm in the data area of each command for the ID in use (only when a=1).
Character size: 4-16 bytes
Character type: Any (alphanumeric)
(All parameters should be in the ASCII format)
【Coding Sample】
A sample using SATO as ID
<A>
<RK>4,D0,,df2:FFE0
<TU>1, SATO
<%>0
<V>0410
<H>0090
<P>00
<L>0101
<%>0
<V>0410
<H>0090
<P>00
<XM>SATO
<%>0
<V>0060
<H>0040
<D>102120*SATO*
<%>0
<V>0195
<H>0055
<P>00
<L>0101
<XM>*SATO*
<%>1