SATO CL6NX Programming Reference

504
<A>
<V>50<H>50<BD>3020654912345678904
<RK>4,D0,,nfc:1,ndf:1,ptl:1,ndd:8,sato.com
(1) (2) (3)
<Q>1
<Z>
Memory data after execution NFC(NDEF) message
(Note: 1 block= 16 bytes)
Block
Data
Byt
es
position
Format
Data
0
0
Record
header
Record
information
0xD1
1
.
.
.
13
NFC(NDEF)
message
1
Number of
characters in the
format
0x01
2
Number of bytes in
the payload
0x09
3
Format(1)
0x55[U]
4
Payload
Protocol
number(2)
0x01
(http://www.)
5
Resource data(3)
0x73[s]
6
0x61[a]
7
0
x74[t]
8
0x6F[o]
14
9
0x2E[.]
10
0x63[c]
11
0x6F[o]
12
0x6D[m]
U
ser memory area
[Notes]
• This command allows printing for continuous printing, cutter printing, dispenser printing and
tear-off.
• This command cannot be specified multiple times in between <A>(start of data transmission)
through <Z>(end of data transmission). Neither can it be specified together with <IP0>(EPC
code write) command.
• Contents of sequential printing or calendar cannot be written as information to the tag
• The sent information and written information are verified before printing when information is
written to tag with this command.
• The default value of parameter b is 0 (stop without ignoring tag error).
• If printing object doesn’t exist for the print job that includes this command, printer only writes for
RFID and doesn’t feed label. The buzzer will sound 6 times if it fails to write to tag. If successful,
the buzzer is sounded 2 times but does not feed the label. If you want to feed or print as blank
label specify 1 for the “fsw: feed without printing” field.
• Refer to the following chart if you want to specify the alphabet “A” in ASCII/HEX data formats.
Mode ASCII HEX
Data 'A' "41"
Code 41H 34H,31H
Parent topic RFID Command (CL4NX Only)

SATO CL6NX Specifications

General

Flash memory	2000 MB
Storage media	Flash
Internal memory	256 MB
Built-in barcodes	Code 39, Code 93, Code-128 Codabar Library, EAN13, EAN8, GS1 DataBar, Industrial 2/5, Interleaved 2/5, Matrix 2/5
Internal storage capacity	2 GB
Cables included	AC
Maximum roll diameter	220 mm
Maximum printing width	167.5 mm
Printing media thickness	0.08 - 0.268 µm
USB port	Yes
USB connector	USB Type-A / USB Type-B
Bluetooth version	3.0
Serial interface type	RS-232C
USB 2.0 ports quantity	2
Connectivity technology	Wired & Wireless
Wi-Fi	No
Display type	LCD
Product color	Black
Display diagonal	3.5 \
Display resolution	320 x 240 pixels
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 80 %
Type	POS printer
Print speed	10 ips
Print technology	Direct thermal / Thermal transfer
Maximum resolution	203 x 203 DPI

Weight and Dimensions

Depth	457 mm
Width	338 mm
Height	321 mm
Weight	20000 g