66
[ESC+AL] Field alignment
ESC AL ParameterHexadecimal code
<1B>
16
<41>
16
<4C>
16
a
Initial value a=1
When the power is OFF The set parameter is not maintained.
Valid range within items The set parameter is valid until the next valid setting.
Valid range and term of
command
Valid range between items The set parameter becomes initial value at the next item
<A>.
[Function]
The base reference point specified with print positioning commands <H>, <V> is equal to the
"Alignment position" of this command. The field’s base reference points are changeable with
"Alignment position". The supported fields are all text fields, barcode, 2D barcode, graphics, ruled
lines and boxes etc.
[Format]
<AL>a
• Parameter
a Alignment position
1: Top left
2: Top center
3: Top right
4: Middle left
5: Middle center
6: Middle right
7: Bottom left
8: Bottom center
9: Bottom right
[Field and alignment positions (for font command)]
The number inside the circle indicate the value of parameter a, "Alignment position (the positions
specified with print positioning commands <H>, <V>".
BlogÁe
3
6
98
5
2
1
4
7
9
8
7
4
5
6
1 2 3
For horizontal orientation
For vertical orientation
Field: The area that is rendered with one command
To Next Page
Loading...
Need help?
General
Weight and Dimensions
