437
[ESC+RK] RFID write (ISO/IEC15693) (CL4NX Only)
Command ESC RK Parameter
Hexadecimal code <1B>
16
<52>
16
<4B>
16
See the tables in
"･
Parameter" below.
Initial Value None
When turning off the power The set command is not maintained.
Valid range within item The set parameter becomes invalid.
Valid range and term of
command
Valid range between items The set parameter becomes invalid.
[Function]
Specifies the data to write on RFID tag that supports ISO/IEC15963.
[Format]
[Standard format]
<RK>a,(b,)Dmmmm,n~n(,iso:c)(,wsb:sss)(,lbs:xxx,lbn:yyy)(,eas:v)(,afi:ww)(,dsf:xx)(,eal:g)(,afl:h)
(,dsl:i)(,eap:jjjjjjjj)(,eai:kkkk)(,pw0-4:eeeeeeee)(,aw0-4:ffffffff)(,kpw:gggggggg)(,pps:lll,m)(,fsw:f)
[Conventional format]
<RK>a,(b,)Dmmmm,n~n(,Ws:sss)(,Ls:xxx,Ln:yyy)(,Ea:v)(,Af:ww)(,Ds:xx)(,Al:h)(,Dl:i)(,Fs:f)
[Conventional format] is meant for the compatibility with models prior to CL4NX. For CL4NX and
models onwards, create with [Standard format] when using commands as new parameters.
• Parameter
Specification of inlet type
a Valid range for models with Takaya
module：
2,3,5
2 : ICODE
Maximum number of bytes for products are followings;
• ICODE SLI : 112
• ICODE SLIX : 112
• ICODE SLIX-S : 160
3 : Tag-it
Maximum number of bytes for products are followings;
• Tag-it HF-I Plus : 256
• Tag-it HF-I Pro : 32
• Tag-it HF-I Standard : 32
5 : my-d
Maximum number of bytes for products are followings;
• my-d vp SRF55V10P(custom) : 1000
• my-d vp SRF55V10P(ISO) : 992
Note
• A tag error occurs when data exceed the maximum number of bytes for each product.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
